Source: kernel-source-2.4.18-wolk3.7 Section: devel Priority: optional Maintainer: Marc-Christian Petersen Standards-Version: 3.5.6 Build-Depends: debhelper (>= 2), modutils, kernel-package (>= 7.95) Package: kernel-source-2.4.18-wolk3.7 Architecture: all Section: devel Priority: optional Provides: kernel-source, kernel-source-2.4, kernel-source-2.4.18 Depends: binutils, bzip2, fileutils (>= 4.0) Recommends: libc-dev, gcc, make Suggests: libncurses-dev | ncurses-dev, kernel-package Description: WOLK-Linux kernel source for kernel-version 2.4.xx This package provides the source code for the Linux kernel version 2.4.xx patched by WOLK-Team. . You may configure the kernel to your setup by typing "make config" and following instructions, but you could get ncursesX.X-dev and tkX.X-dev and try "make menuconfig" for a jazzier, and easier to use interface. Also, please read the detailed documentation in the file /usr/share/doc/kernel-source-2.4.18-wolk3.7/README.headers.gz. . If you wish to use this package to create a custom Linux kernel, then it is suggested that you investigate the package kernel-package, which has been designed to ease the task of creating kernel image packages. Package: kernel-doc-2.4.18-wolk3.7 Architecture: all Section: doc Priority: optional Provides: kernel-doc, kernel-doc-2.4, kernel-doc-2.4.18 Depends: fileutils (>= 4.0) Description: Linux kernel specific documentation for wolk v3.7 This package provides The various readme's in the 2.4.18 kernel Documentation/ subdirectory: these typically contain kernel-specific installation notes for some drivers for example. See /usr/share/doc/kernel-doc-X.X.XX/Documentation/00-INDEX for a list of what is contained in each file. Please read the Changes file, as it contains information about the problems, which may result by upgrading your kernel. Package: kernel-headers-2.4.18-wolk3.7 Architecture: i386 Section: devel Priority: optional Depends: fileutils (>= 4.0) Provides: kernel-headers, kernel-headers-2.4 Description: Headers for Linux kernel version 2.4.18 on Pentium-Classic This package provides kernel header files for version 2.4.18 on Pentium-Classic, for sites that want the latest kernel headers. Please read /usr/share/doc/kernel-headers-2.4.18-wolk3.7-586tsc/debian.README.gz for details Package: kernel-image-2.4.18-wolk3.7 Architecture: i386 Section: base Priority: optional Provides: kernel-image, kernel-image-2.4 Depends: initrd-tools (>= 0.1.21), fileutils (>= 4.0), modutils (>= 2.3.12) Suggests: lilo (>= 19.1), fdutils, kernel-doc-2.4.18, kernel-pcmcia-modules-2.4.18-wolk3.7 | pcmcia-modules-2.4.18-wolk3.7 Description: Linux kernel image for version 2.4.18 on 386. This package contains the Linux kernel image for version 2.4.18 on 386, the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . If you wish to update a bootdisk, or to use a bootloader to make installing and using the image easier, we suggest you install the latest fdutils (for formatting a floppy to be used as boot disk), and LILO, for a powerful bootloader. Of course, both these are optional. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Package: kernel-image-2.4.18-wolk3.7-586tsc Architecture: i386 Section: base Priority: optional Provides: kernel-image, kernel-image-2.4 Depends: initrd-tools (>= 0.1.21), fileutils (>= 4.0), modutils (>= 2.3.12) Suggests: lilo (>= 19.1), fdutils, kernel-doc-2.4.18, kernel-pcmcia-modules-2.4.18-wolk3.7-586tsc | pcmcia-modules-2.4.18-wolk3.7-586tsc Description: Linux kernel image for version 2.4.18 on Pentium-Classic. This package contains the Linux kernel image for version 2.4.18 on Pentium-Classic, the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . If you wish to update a bootdisk, or to use a bootloader to make installing and using the image easier, we suggest you install the latest fdutils (for formatting a floppy to be used as boot disk), and LILO, for a powerful bootloader. Of course, both these are optional. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Package: kernel-image-2.4.18-wolk3.7-386 Architecture: i386 Section: base Priority: optional Provides: kernel-image, kernel-image-2.4 Depends: initrd-tools (>= 0.1.21), fileutils (>= 4.0), modutils (>= 2.3.12) Suggests: lilo (>= 19.1), fdutils, kernel-doc-2.4.18, kernel-pcmcia-modules-2.4.18-wolk3.7-386 | pcmcia-modules-2.4.18-wolk3.7-386 Description: Linux kernel image for version 2.4.18 on 386. This package contains the Linux kernel image for version 2.4.18 on 386, the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . If you wish to update a bootdisk, or to use a bootloader to make installing and using the image easier, we suggest you install the latest fdutils (for formatting a floppy to be used as boot disk), and LILO, for a powerful bootloader. Of course, both these are optional. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Package: kernel-image-2.4.18-wolk3.7-686 Architecture: i386 Section: base Priority: optional Provides: kernel-image, kernel-image-2.4 Depends: initrd-tools (>= 0.1.21), fileutils (>= 4.0), modutils (>= 2.3.12) Suggests: lilo (>= 19.1), fdutils, kernel-doc-2.4.18, kernel-pcmcia-modules-2.4.18-wolk3.7-686 | pcmcia-modules-2.4.18-wolk3.7-686 Description: Linux kernel image 2.4.18 on PPro/Celeron/PII/PIII/PIV. This package contains the Linux kernel image for version 2.4.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium IV, the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . If you wish to update a bootdisk, or to use a bootloader to make installing and using the image easier, we suggest you install the latest fdutils (for formatting a floppy to be used as boot disk), and LILO, for a powerful bootloader. Of course, both these are optional. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Package: kernel-image-2.4.18-wolk3.7-686-smp Architecture: i386 Section: base Priority: optional Provides: kernel-image, kernel-image-2.4 Depends: initrd-tools (>= 0.1.21), fileutils (>= 4.0), modutils (>= 2.3.12) Suggests: lilo (>= 19.1), fdutils, kernel-doc-2.4.18, kernel-pcmcia-modules-2.4.18-wolk3.7-686-smp | pcmcia-modules-2.4.18-wolk3.7-686-smp Description: Linux kernel image 2.4.18 on PPro/Celeron/PII/PIII/PIV SMP. This package contains the Linux kernel image for version 2.4.18 on Pentium Pro/Celeron/Pentium II/Pentium III/Pentium IV with SMP support, the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . If you wish to update a bootdisk, or to use a bootloader to make installing and using the image easier, we suggest you install the latest fdutils (for formatting a floppy to be used as boot disk), and LILO, for a powerful bootloader. Of course, both these are optional. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Package: kernel-image-2.4.18-wolk3.7-k6 Architecture: i386 Section: base Priority: optional Provides: kernel-image, kernel-image-2.4 Depends: initrd-tools (>= 0.1.21), fileutils (>= 4.0), modutils (>= 2.3.12) Suggests: lilo (>= 19.1), fdutils, kernel-doc-2.4.18, kernel-pcmcia-modules-2.4.18-wolk3.7-k6 | pcmcia-modules-2.4.18-wolk3.7-k6 Description: Linux kernel image for version 2.4.18 on AMD K6/K6-II/K6-III This package contains the Linux kernel image for version 2.4.18 on AMD K6/K6-II/K6-III, the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . If you wish to update a bootdisk, or to use a bootloader to make installing and using the image easier, we suggest you install the latest fdutils (for formatting a floppy to be used as boot disk), and LILO, for a powerful bootloader. Of course, both these are optional. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Package: kernel-image-2.4.18-wolk3.7-k7 Architecture: i386 Section: base Priority: optional Provides: kernel-image, kernel-image-2.4 Depends: initrd-tools (>= 0.1.21), fileutils (>= 4.0), modutils (>= 2.3.12) Suggests: lilo (>= 19.1), fdutils, kernel-doc-2.4.18, kernel-pcmcia-modules-2.4.18-wolk3.7-k7 | pcmcia-modules-2.4.18-wolk3.7-k7 Description: Linux kernel image for version 2.4.18 on AMD K7 This package contains the Linux kernel image for version 2.4.18 on AMD Duron/Athlon, the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . If you wish to update a bootdisk, or to use a bootloader to make installing and using the image easier, we suggest you install the latest fdutils (for formatting a floppy to be used as boot disk), and LILO, for a powerful bootloader. Of course, both these are optional. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources.